Gibbons Dual Rangemaster & Red Llama | Purple Nitro | Texas Instruments Gold Pin Germanium | 3 of 4

£350.00

1 in stock

Category:

Description

Description of Product

There is something about those early Billy Gibbons guitar tones that has always fascinated me. That sharp, cutting attack, the thick overdrive underneath it and the way the guitar seems to sit right on the edge of falling apart without ever quite losing control.

That was the inspiration behind this series.

This is the third pedal in a collection of just four Gibbons dual pedals, each combining my germanium Rangemaster treble booster with a modified Red Llama overdrive.

The Rangemaster sits at the front of the signal path, allowing it to drive the Red Llama directly. Both circuits can also be used independently, giving you a traditional treble booster, a distinctive overdrive and the option of combining the two.

Only four pedals exist in this series, each with its own finish, artwork, aesthetic and vintage germanium transistor.

This third example is built around a purple nitrocellulose lacquer finish, complemented by classic cupcake control knobs.

The traditional styling of the knobs works particularly well against the purple lacquer, giving the pedal something of a vintage instrument aesthetic rather than the appearance of a conventional modern effects pedal.

Inside, the Rangemaster features a Texas Instruments 2N2904 gold-pin germanium transistor, alongside a selection of vintage components.

The four pedals share the same basic design, but each uses a different germanium transistor. That means every example is individually constructed, with its own particular component selection and character.

The Texas Instruments Gold-Pin Germanium Rangemaster

The first circuit is my germanium Rangemaster, constructed by hand on traditional tagboard.

At its heart is a Texas Instruments 2N2904 gold-pin germanium transistor.

I have also used a vintage Mullard mustard capacitor on the input and a Mullard tropical fish capacitor on the output.

These older components are a deliberate part of the build. I enjoy working with vintage electronics, particularly when recreating circuits that originated in the same period.

The Rangemaster is one of those deceptively simple designs that can make a remarkable difference to the way a guitar interacts with an amplifier.

Rather than simply making everything louder or brighter, its traditional frequency response emphasises the upper midrange, giving individual notes a more immediate attack and helping the guitar cut through.

Into an amplifier that is already beginning to break up, this can produce the sharp, pointed character associated with early British blues-rock and those early Billy Gibbons sounds.

I have also incorporated a Fat switch.

In its traditional position, the Rangemaster delivers the familiar cutting treble boost.

Engage the Fat switch and more low frequencies are allowed through, producing a considerably fuller and heavier response.

This makes the circuit much more versatile, particularly when moving between sharper, more focused guitar sounds and the thicker overdrive associated with heavier 1970s rock.

The Modified Red Llama

The second half of the pedal is my modified Red Llama overdrive, constructed by hand on veroboard.

I have made changes to the original circuit and incorporated selected vintage components throughout.

The Red Llama has always appealed to me because it has a rather different character from many conventional overdrive circuits.

At lower gain settings, it produces a gritty, textured breakup with a slightly rough edge. It adds weight and character to the guitar without necessarily overwhelming the sound of the instrument.

As the gain increases, things become considerably more aggressive.

The overdrive develops a thick, snarling character, with plenty of sustain and enough gain available to move well into heavier 1970s rock territory.

It is not an especially polite circuit, and that is exactly why I like it.

There is a rawness to the way it distorts that works particularly well alongside the more focused response of a Rangemaster.

Two Circuits Working Together

The interesting part of this design is what happens when you combine the two effects.

The Rangemaster comes first, feeding directly into the modified Red Llama.

With the Rangemaster in its traditional setting, the frequency response becomes tighter and more focused before the signal reaches the overdrive.

This brings the upper mids forward, increases the attack and pushes the Red Llama into a more aggressive response.

It is particularly effective for those sharp, biting early ZZ Top-inspired sounds.

Engage the Fat switch and the character changes considerably.

The fuller Rangemaster response drives the Red Llama with more low-frequency content, producing a thicker, heavier distortion.

With the Red Llama gain turned up, the combination becomes particularly gnarly, delivering plenty of sustain, harmonic content and that rough-edged character associated with older rock recordings.

The two circuits can also be used independently, so you are not limited to running them together.

Traditional Construction and Vintage Components

Both circuits are assembled by hand using traditional construction methods.

Germanium Rangemaster

– Texas Instruments 2N2904 gold-pin germanium transistor
– Traditional hand-wired tagboard construction
– Vintage Mullard mustard input capacitor
– Vintage Mullard tropical fish output capacitor
– Switchable traditional and Fat boost voicings
– Selected vintage components throughout

Modified Red Llama

– Hand-assembled veroboard construction
– Modified Red Llama circuit
– Selected vintage components throughout
– Wide gain range, from gritty breakup to aggressive rock distortion

Enclosure and Finish

– Purple-based nitrocellulose lacquer finish
– Classic cupcake control knobs
– Individually finished enclosure
– One of four unique Gibbons dual pedals
– Hand built in England

Description of Sound

There are three distinct ways of using this pedal, and each has its own character.

The Rangemaster

In its traditional setting, the Rangemaster delivers a sharp, focused treble boost with a pronounced upper-midrange character.

It is particularly effective when used to drive an amplifier that is already starting to break up, helping individual notes cut through and giving the guitar a more immediate response.

This is the setting I would reach for when chasing those pointed, aggressive early Billy Gibbons sounds.

Engaging the Fat switch allows more of the guitar’s lower frequencies through the circuit, producing a fuller and more substantial sound.

It is a particularly useful option when moving towards heavier 1970s rock tones.

The Red Llama

The modified Red Llama has a much rougher personality.

At lower gain settings, it produces a gritty overdrive with plenty of texture and a slightly ragged edge.

Increase the gain and it develops a thick, aggressive distortion with plenty of sustain.

There is a snarling quality to the way it breaks up, making it particularly well suited to older rock sounds where a little roughness is part of the appeal.

Both Circuits Together

With the Rangemaster feeding the Red Llama, you can use the boost to change the way the overdrive responds.

The traditional Rangemaster setting provides a sharper, tighter response with plenty of upper-midrange bite.

Switching to Fat mode produces a thicker and heavier sound, particularly when combined with the higher gain settings of the Red Llama.

From cutting blues-rock tones through to heavy, gnarly 1970s distortion, the combination covers a surprising amount of ground.

A Note on the Gibbons Series

I have built just four of these pedals, and each one is different.

Every example combines a germanium Rangemaster with my modified Red Llama, but each has its own nitrocellulose finish, artwork, control knobs and vintage germanium transistor.

This third example stands apart with its purple lacquer, classic cupcake knobs and Texas Instruments gold-pin transistor.

The combination of vintage electronics, traditional construction methods and individual finishes is what makes this series particularly interesting to me.

I wanted to build something that could be enjoyed as a working guitar pedal, but which would also appeal to somebody who appreciates unusual components and small-production boutique effects.

These are not four identical pedals with different paintwork. Each has been individually assembled and finished, with its own selection of components and visual character.

Call to Action

This purple Gibbons is number three in a series of just four individually built pedals.

Each example has its own finish, artwork, component selection and character. This particular purple nitrocellulose and cupcake knob combination will not be repeated exactly.

For the guitarist who appreciates early ZZ Top, vintage electronics, traditional construction and genuinely limited boutique effects, this is an opportunity to own an individual piece from a very small collection.

Built by hand in England by Hello Sailor Effects.

Reviews

There are no reviews yet.

Be the first to review “Gibbons Dual Rangemaster & Red Llama | Purple Nitro | Texas Instruments Gold Pin Germanium | 3 of 4”

Your email address will not be published. Required fields are marked *