Gibbons Dual Rangemaster & Red Llama | Yellow Nitro | Texas Instruments Gold Pin Germanium | 4 of 4
£350.00
1 in stock
Description
Description of Product
There is something about the guitar sounds on those early ZZ Top records that has always fascinated me. Billy Gibbons managed to get a sound that was sharp, aggressive and full of character, but still had plenty of weight behind every note.
That was the starting point for this little collection of pedals.
This is the fourth and final example in my Gibbons series, combining a traditional germanium Rangemaster treble booster with my own modified Red Llama overdrive.
The Rangemaster sits at the front of the signal path, feeding directly into the Red Llama. Each circuit can be used independently, or both can be engaged together to produce a much thicker, more aggressive sound.
Just four of these pedals have been built. Each has its own nitrocellulose lacquer finish, artwork, aesthetic and individually selected vintage germanium transistor.
This final example is finished in yellow nitrocellulose lacquer, giving it a particularly striking appearance.
Rather than producing four identical pedals with different paintwork, I wanted each example to have its own identity. The finishes, components and visual details were all chosen individually.
Inside this yellow example is a Texas Instruments 2N1305 gold-pin germanium transistor, fitted in the Rangemaster circuit.
The 2N1305 is a vintage germanium device from an earlier generation of transistor manufacture. It is precisely the sort of component I enjoy incorporating into these builds, particularly when working with circuits that originated during the early days of transistorised guitar effects.
Alongside the transistor are vintage Mullard capacitors and other selected components, all assembled using traditional construction methods.
The result is a pedal that brings together two very different circuits, vintage electronics and an individually finished enclosure.
The Texas Instruments 2N1305 Rangemaster
The first circuit is my traditional germanium Rangemaster, constructed by hand on tagboard.
At its heart is a Texas Instruments 2N1305 gold-pin germanium transistor.
The circuit also features a vintage Mullard mustard capacitor on the input and a Mullard tropical fish capacitor on the output.
I have always liked the simplicity of the Rangemaster. There are very few components involved, but the effect it can have on the way a guitar drives an amplifier is quite remarkable.
In its traditional setting, the Rangemaster emphasises the upper midrange, giving the guitar a sharp, pointed attack and helping individual notes cut through.
This is particularly effective when driving an amplifier that is already beginning to break up.
It is the sort of sound that immediately brings to mind early British blues-rock and those cutting, aggressive Billy Gibbons guitar tones.
There is also a Fat switch, which considerably expands what the Rangemaster can do.
In its traditional position, the circuit delivers that familiar focused treble boost.
Engage the Fat switch and more low frequencies are allowed through, giving the guitar a fuller, heavier response.
This makes the Rangemaster useful for considerably more than the classic pointed treble booster sound.
With the Fat switch engaged, it can produce the thicker, more substantial drive associated with heavier 1970s rock.
The Modified Red Llama
The second circuit is my modified Red Llama overdrive, assembled by hand on veroboard.
I have made changes to the original design and incorporated selected vintage components throughout the circuit.
The Red Llama has a rather distinctive character.
It is not a particularly polite overdrive, and that is one of the reasons I like it.
At lower gain settings, it produces a gritty, textured breakup with plenty of character. It adds weight and a slightly ragged edge to the guitar without completely taking over the sound.
As the gain increases, the circuit becomes considerably more aggressive.
There is a thick, snarling quality to the distortion, with plenty of sustain and enough gain available to get into some fairly heavy 1970s rock territory.
It has a rawness that works particularly well alongside the more focused response of the Rangemaster.
Two Circuits Working Together
The interesting part of this pedal is what happens when the Rangemaster and Red Llama are used together.
The Rangemaster comes first in the signal path, allowing it to shape and boost the guitar signal before it reaches the overdrive.
With the Rangemaster in its traditional setting, the Red Llama receives a more focused signal with greater emphasis on the upper midrange.
This produces a sharper attack, tighter low frequencies and a more aggressive response.
It is particularly useful for those early ZZ Top-inspired guitar sounds, where the guitar has plenty of bite without becoming overly thick.
Engage the Rangemaster’s Fat switch and things change considerably.
More low-frequency content is passed into the Red Llama, producing a fuller and heavier distortion.
With the Red Llama gain increased, the combination becomes particularly gnarly, with plenty of sustain and a rough-edged character that works beautifully for heavier 1970s rock.
The two circuits can also be switched independently, giving you three distinct ways of using the pedal.
Traditional Construction and Vintage Components
Both circuits are individually assembled using traditional construction methods.
Germanium Rangemaster
– Vintage Texas Instruments 2N1305 gold-pin germanium transistor
– Hand-wired tagboard construction
– Vintage Mullard mustard input capacitor
– Vintage Mullard tropical fish output capacitor
– Traditional treble boost and switchable Fat voicing
– Selected vintage components throughout
Modified Red Llama
– Hand-assembled veroboard construction
– Modified Red Llama circuit
– Selected vintage components throughout
– Wide gain range, from gritty overdrive to aggressive rock distortion
Enclosure and Finish
– Yellow nitrocellulose lacquer
– Individually finished enclosure
– Fourth and final pedal in the Gibbons series
– One of four unique examples
– Hand built in England
Description of Sound
Although the two circuits are relatively simple, they provide a surprisingly wide range of sounds when used independently or together.
The Rangemaster
The traditional Rangemaster setting produces a sharp, focused treble boost with plenty of upper-midrange bite.
Into an amplifier that is already beginning to break up, it brings individual notes forward and gives the guitar a more immediate attack.
This is the setting I would use when chasing those pointed, aggressive early Billy Gibbons tones.
Engage the Fat switch and the sound becomes considerably fuller.
The additional low-frequency content produces a thicker response, making the Rangemaster particularly useful for heavier blues-rock and 1970s rock sounds.
The Red Llama
The modified Red Llama produces a gritty, textured overdrive at lower gain settings.
It has a slightly ragged character that works particularly well with older-style guitar sounds.
As the gain increases, it becomes much more aggressive, producing thick, snarling distortion with plenty of sustain.
There is enough gain available to move well beyond conventional low-gain overdrive.
Both Circuits Together
With the Rangemaster feeding the Red Llama, the two effects become something rather different.
In the traditional Rangemaster setting, the combination has a sharper, tighter response with plenty of attack and upper-midrange emphasis.
Engaging the Fat switch produces a thicker, heavier sound, particularly when the Red Llama is running at higher gain settings.
From early ZZ Top-inspired tones to aggressive, gnarly 1970s rock distortion, there is quite a bit of ground available from these two circuits.
A Note on the Gibbons Series
I have built just four of these pedals.
Each combines a germanium Rangemaster with my modified Red Llama, but every example has its own nitrocellulose lacquer finish, artwork, aesthetic and vintage germanium transistor.
The four examples are:
1. Green over yellow nitrocellulose, Gibbons lettering and metal Texas cattle badge.
2. Rose sparkle nitrocellulose, bronze knobs and a miniature 1950s Mullard hearing-aid germanium transistor.
3. Purple-based nitrocellulose, classic cupcake knobs and a Texas Instruments gold-pin transistor.
4. Yellow nitrocellulose with a Texas Instruments 2N1305 gold-pin germanium transistor.
The idea was to produce four individually finished pedals rather than a conventional production run.
Each one has been assembled by hand using traditional construction methods and selected vintage components.
They are intended to be played and enjoyed, but I also wanted them to appeal to people who appreciate unusual boutique effects, vintage electronics and the individuality of small-production instruments.
Call to Action
This yellow Gibbons is the fourth and final example in a series of just four individually built pedals.
Its yellow nitrocellulose finish and Texas Instruments 2N1305 gold-pin germanium transistor distinguish it from the other three examples.
For the guitarist who appreciates early ZZ Top, vintage germanium electronics, traditional construction and genuinely limited boutique effects, this is an opportunity to own an individual piece from a very small collection.
Built by hand in England by Hello Sailor Effects.













Reviews
There are no reviews yet.